DIGITAL MONITOR MODEL 2590

Digital Monitor, Model 2590 The Digital Monitor Model 2590 receives a 4-20mA signal from the vibration converter, scales it into a vibration value for digital display and allows the vibration to be monitored by using a 2-high limit position alarm contact output. As an operating power supply for vibration converter is incorporated to make installation easier.

SPECIFICATIONS
Input signal	4-20 mA (Span/Zero fine adjustable)
Indication range	Can be set at 0 to intended value on scale value.
Indicator	7-segment red LED, 5-digit
Sampling cycle	Can be set at 0.2/1/2/5/10 seconds.
Accuracy	+0.1%2 digits (23oC5oC)
Power supply for converter	+15V, 40mA max.
Alarm setting	2 high limit positions AL I (HH) and AL II (H)
Alarm value check	Indicated for about 10 sec. by pushing AL I or AL II
Alarm relay contact	Transfer. Rating AC 250 V 5A, DC 30V 5A max.
Alarm delay	Can be set at 0-99.9 sec. as desired.
Analog output caption)	0-10V, 1-5V, 4-20 mA when ordering.
Power supply	AC 85-264 V 50/6 0Hz, 5 VA or less
Operating temp. and humidity	0-50oC, 85%RH max. (No dewing shall occur.)
Dimensions and weight	96(W) x 48(H) x 90.4(D) mm Approx. 300 grams.

Guard Box Model 2500-21 Weatherproof guard box for Vibro-converter. Dimensions 70 x 90 x 56 mm Weight 390 gr.

Click for your Email or Inquiry